4 Home Maintenance Tasks We Keep on Forgetting

Having a home maintenance checklist is important. If you want your home to be in its top shape all the time, you have to make sure that you do more than just your daily chores. This maintenance task however, is mostly not complete. We have met a lot of people who forget the important things, or they don’t even know that they should check up on these things too. If you don’t want to suffer from the consequences of these forgotten tasks, which is obviously costly repairs, read more.  

  1. Checking the Water Pressure

The high-water pressure on your fixtures can harm appliances, connections and pipes. This can waste a massive amount of water and can also create water hammer. However, not everyone of us is aware that we should check this from time to time. Although it always gets overlooked, it’s a maintenance task that’s easy to perform. There are pressure reducing valves and gauge that you can buy at home centers. Conduct a water pressure test or hire a professional of plumber lees summit.

  1. Testing the Sump Pump

Most of us are not aware of what the sump pump can do if it’s not functioning properly anymore. If you are not aware of the importance of maintaining it, you can end up with a flooding basement. The disaster could be avoided if you just took 2 minutes of your time to untangling a possible tangled cable. Make sure that your pump has a vertical float switch, and you check on it twice or thrice a year. You can check tis functionality by dumping water into the basin.

  1. Cleaning the Refrigerator Coils

The coils of the refrigerator are located on its back or across its bottom. Dust, cobwebs, pet hair and other debris can accumulate in the cords. Once it does, it would be difficult for the fridge to release heat. This will lead to the compressor working harder and longer so it can provide the set temperature. Once it does, it the fridge will use more energy. If you notice a spike in your electric bill even though you’re using the same amount of energy, the condenser coils could be one of the culprits.

Cleaning the coils is important, and it doesn’t have to be done everyday. You can do this maintenance task once every three or four months. Also, there are coil-cleaning brushes available out there. It’s an effective when it comes to cleaning the coils located in tight areas.

  1. Checking the Window Weep Holes

Most of the vinyl replacement windows or sliding windows have weep holes on the bottom of the frame. The holes are designed to drain the rainwater away. So, once it’s not maintained well debris and bugs can get plugged in these holes. Once this happens, water can fill up the holes and channel, leading to spills inside your house.

You can check if the weep system is working by pouring a glass of water in it. If the stream is not steady, pole a wire hanger into the hole.

Read More

Question about Floor Polishing Answer

Floor Polishing is a tough job that even you can do with the right equipment and the standard knowledge. You can also have the professionals do it for you. Here is a link to their website if you are interested www.bestfloorsandingmelbourne.com.au. If you have the time and you like to do it then feel free to polish your floor yourself. Just make sure that you know what you’re doing so you won’t damage your floor. Here are some questions you may have about floor polishing. 

#1 What is Floor Polishing?  

Floor Polishing from the name itself is simply restoring the beauty of your floor. Stains that are unsightly are removed. It will be sanded so it will become smooth again.  

Bonus Question: What does a floor polishing company do?  

It depends on what type of floor the company specializes. They may specialize on concrete floors and wood floors or both. It also depends on the company what services they have besides the actual floor polishing. Some companies offer repairs, restoration, staining, recoating and coating services. You just have to find the company that can give you what you need.  

#2 How long is it until you have to repolish your floors again?  

If it is a floor that has a lot of traffic then the suggested time that you’ll need to repolish again is two to four months. If it is a floor that has less traffic then until it is in need of a revamp, you don’t need to do it every 2 months or so.  

#3 Is it necessary to clean the floor before repolishing?  

Yes, this is a necessary step just be careful that when you are cleaning you’re not scratching your floors. Take the necessary precaution to avoid further scratching your floor.  

#4 Can you change the finish of your floor?  

You can but it is going to be a big work and a big cost. You’ll have to find out what is the current finish of your floor. After you determined what are the necessary steps to make to remove them and then decide on your new finish.  

#5 How long until you can walk again on your newly refinished floor  

It depends on what finish you choose. Usually they will put it in the packaging the drying time of the finish. On average approximately after 24 hours you can walk on your floor. However, since it is still new it is nice to note to protect your floors for the next 28 hours. Meaning do not walk on it with shoes or barefoot. Use socks or a microfiber slipper so as to not damage the integrity of the finish. 

Bonus Question: How long will the finish fully cure and you can say I’m already safe.  

It will take about 21 days for a finish to fully cure however you can walk on them with socks without damaging them after a day or two. You can put on your furniture after two days but avoid area rugs until 10 days.  

Read More

Is Hiring a Professional Electrician Important? 

It is significant to give focus to every detail and perform your outstanding meticulousness whenever you’re looking for an electrician. When doing your research, you would often see electricians that chargers incredibly lower fees than other electricians. 

 Professional Electrician

Why? Well, the answer is easy. It is because they aren’t licensed electricians and don’t have proper certifications. These electricians haven’t probably had the required training and schooling. That is the reason why they don’t have any licenses or certifications. Being certified and licensed provides an assurance to clients that the work conducted would be that of an expert quality and standard. Additionally, certified professional electricians carry with them their warranty if ever something goes wrong.  

Certified Electricians are Typically Competent and Reliable 

It is part of the process of licensing that each electrician must go through testing. This includes showing skill of conducting electrical task of all sorts. This advanced training and testing is an extra benefit for people looking for an electrician. This contributes to the reliability, dependability, and competency of the electrician. These are the qualifications you should look for every service provider. Going through the demanding training and testing is required to obtain an electrician’s license and professional certification. 

If an electrician does all the tests, it only means that he would comply with every building code when giving services and would also provide concentration to the regulations, rules, and other compliance acts in any given state, town, or city. Certified professional electricians do all work to the updated code. Additionally, the thorough training and schooling that certified electricians go through assure that they’re all knowledgeable with the permits they require to obtain in a certain location or town before they could do any job. Also, these similar training shows how the work should be done to make sure that each provide service is updated to the code in any given location. 

Professional Electricians are Insured 

Avoiding personal liability is one significant feature of electrical job. Everyone knows how risky it could be working with electrical wirings. While injuries are typically rare when each of the proper safety measure is taken, accidents could still happen. People who aren’t properly trained and schooled, and lack licensing and professional certifications have high chance of becoming the victim to a possible personal liability and property claim and electrical accidents. 

A lot of times, faulty wiring connections lead to fires. These could quickly spread all over residential complexes and communities. Damages required being accounted for when something like that happens. Of course, you could surely imagine the challenges and issues that will lie ahead if you hire an electrician that isn’t certified or licensed.  

You may feel that you have to do the job yourself whenever issues in your house arise. Though you are not alone, it could often be risky for you to try to fix the problems if you are not trained in that field. To avoid any property damages or injuries, it is wise that you hire the best Redlands Electrician 

Read More

Recent Comments

    Archives